Chauvet Tiger DMX 60 Manual del operador descargar pdf (Pagina 86)

Page 118 - 2. Patching

Pearl 2008 Manual - 16th July 2007

and dimmers to Groups, which can be useful if you usually select the

same set of fixtures together. Groups are described in the next chapter.

2.1.2 Patching dimmers

Each dimmer channel is allocated to one handle. If you want to link

dimmers together, you can allocate several to the same handle.

1> Press Patch, then A [Dimmer]

2> On the top line of the display, the Pearl shows the DMX address it

is going to patch at. You can change this by typing a new address

on the numeric keypad. You can also use softkey E [Select a DMX

line] to patch onto one of the other 3 DMX output lines.

3> To patch a single dimmer, press a handle Swop button. To patch a

range of dimmers, hold down the Swop button for the first

dimmer in the range, then press the last Swop button in the

range. The range of dimmers will be patched to sequential DMX

addresses.

4> To patch another dimmer to the same handle, enter the new DMX

channel and press the Swop button again

5> Repeat from step 2 for other dimmers.

• The VDU screen will

show the channels

which have been

patched.

• You can patch

multiple dimmers

onto the same

handle by typing

the DMX address of

the next dimmer to

be patched and

pressing the Swop

button again.

• You can patch

dimmers to the top

faders (31-60) by

holding down the AVO button before pressing the Swop button.

This allows you to patch up to 60 dimmers or fixtures on one page.

It is often convenient to use the top faders for dimmers and the

bottom faders for fixtures allowing you to keep all your fixtures and

dimmers on one fixture page.

• When in Dimmer Patch mode you can set options for dimmer

channels which you are going to patch. You can set the “Full on”

level to less than 100% using option A, and select a different

dimmer response curve using option B. To use the “User curve”

setting you need to load in a user curve, see page

197. These

settings affect all dimmer channels you patch afterwards, until you

change the settings again. Channels you have already patched are

not affected.

2.1.3 Patching moving light fixtures

Moving light fixtures are more complicated to patch than dimmers

Devices patched

Grid showing usage

of DMX channels

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 205 206

Comentarios a estos manuales

Sin comentarios

Chauvet Tiger DMX 60 Manual del operador Pagina 86

Comentarios a estos manuales