Chauvet Tiger DMX 60 Manual del operador Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 206
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
3. Controlling dimmers and fixtures - Page 17
Pearl 2008 Manual - 16th July 2007
automatically deselected the next time you press a fixture
select button.
3.4 Using groups
If you’ve got several fixtures performing a similar function, you often
want to select them all at the same time. To avoid lots of swop-button-
pressing, the Pearl allows you to put fixtures or dimmer channels into
groups, which you can then use to select all the fixtures just by typing
the group number. If you are using the graphics tablet you just press
one button on the tablet and all the fixtures in the group are magically
selected.
Making a group
Select the fixtures or dimmer channels you want to put into the
group
Press the ML Menu button, then E [Record Group].
Type the group number 1-200 on the numeric keypad and press
Enter.
Once you have created a group, you can then quickly select all the
fixtures in the group:
Selecting a group of fixtures
Type the group number on the keypad
Press A [Recall Group].
The fixtures in the group are selected, all other fixtures are
deselected.
If you are using the graphics tablet, you can save and recall groups
with one touch of the pen. This is described in more detail in the
Graphics Tablet chapter.
3.5 Copying settings from other fixtures – Align
If you’ve set a nice colour on one of your fixtures, and you want to
copy it to all the other fixtures of the same type, the Pearl’s Align
function can do that. You can also use it to make all pan and tilt
positions the same for a range of units or to make dimmer levels the
same.
Copying settings from other fixtures
Press an attribute button to select the attribute you want to copy
Select the fixture or dimmer channel you want to copy from
Select the fixtures or dimmer channels you want to copy to
Press the ML Menu button, then D [Align <attribute name>]”.
Or you can press C [Align Fixtures], to align all attributes.
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 205 206

Comentarios a estos manuales

Sin comentarios