Chauvet Tiger DMX 60 Manual del operador descargar pdf (Pagina 149)

9. The graphics tablet - Page 181

Pearl 2008 Manual - 16th July 2007

the tablet Stage area.

If you press the pen on the Nudge pad, the tablet will go into Nudge

mode. Now when you draw on the Stage area of the tablet, all selected

fixtures will move relative to their current positions. This can be useful

if you want to slightly reposition a fixture or a group of fixtures. Press

the pen on the Absolute pad to turn off this mode.

The top right corner of the VDU shows A for Absolute or N for Nudge.

If you have trained the Pearl, which is described on page

131, you can

turn on Tracking mode by pressing the pen on the Track ON pad. When

you press the pen on the stage area of the tablet, all the lights will

point at the same place on the stage. If you draw the stage layout on

the tablet overlay, you can instantly focus the fixtures on a specific

point on the stage just by pressing the pen on the tablet.

9.1.5 Changing colours and other attributes

If the fixture can do colour mixing, you can set the colour by drawing in

the colour control area of the tablet. There is a colour Nudge pad which

allows you to change the colour slightly as for positions. The colour

Absolute pad lets you set up a new colour. The Luminosity bar sets the

brightness of the colour.

You can change individual attributes of selected fixtures by pressing the

pen on to one of the attribute pads, then (without lifting the pen)

drawing up and down on the tablet.

You can also use the fader bar to change attributes, press the pen on

the attribute pad you want to change then draw up and down on the

fader bar.

Press the pen on the Dimmer pad above the fader bar to allocate it to

the dimmer attribute.

There is an Align pad and a Flip pad which allow instant access to the

functions on the console (see page

128).

9.1.6 Recalling palette entries (focuses)

You can recall palettes 1-60 by pressing the pen onto one of the

Focuses pads.

9.1.7 Storing palette entries (focuses)

You can store palette entries from the graphics tablet. The tablet refers

to these as Focuses, which is what they were called in earlier Avolites

consoles.

The buttons above the stage area allow you to edit and save position

palettes. Press the pen on the Recall Focus pad, then press the pen on

a focus pad to select all the fixtures in that palette entry and set the

values. You can move all the fixtures together, or the Step to Next and

Step to Last pads on the tablet will step through the fixtures one at a

time. When you have made the changes, press the pen on the Store

Pan/Tilt pad to store the changes back into the same palette entry.

You can also change other attributes in a palette, but to store changes

other than pan/tilt you use the Store Focus pad on the right hand side

of the tablet.

9.1.8 Programming functions on the tablet

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 205 206

Comentarios a estos manuales

Sin comentarios

Chauvet Tiger DMX 60 Manual del operador Pagina 149

Comentarios a estos manuales