Chauvet Tiger DMX 60 Manual del operador Pagina 165

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 206
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 164
12. Setup - Page 197
Pearl 2008 Manual - 16th July 2007
12.1.2 Setting the Wheel acceleration
The control wheels allow you to set 16-bit control values to the fixtures,
and have an acceleration function so you don’t have to spin the wheel
for hours if you need to make large changes to the fixtures.
Hold down the AVO button and press the 2 button to set the different
wheel acceleration curves. The current curve is shown on the main part
of the screen. “Linear Fast” has the fastest response and “Linear Slow”
the slowest and most accurate.
12.2 User functions
12.2.1 The Wipe menu
This menu is obtained by turning the key to System mode and then
pressing A [Service]. Softkey F [Wipe] then selects the Wipe menu.
You can selectively wipe various parts of the console, or you can wipe
the whole thing. Press softkeys B, C and D to turn the wipe options on
and off. The option is highlighted when that wipe option is turned on.
The options are:
A [Cancel] - quits Wipe mode
B [Patch] - Sets the Patching to be wiped. The programming and
individual Palettes will also be wiped (as they would mean nothing
without the patch), however shared palettes (see page
135) will
remain.
C [Palettes]- Sets the Palettes (including shared palettes) to be wiped.
D [Programming] - Sets the memories, chases and theatre stack to
be erased. The Patch and palettes (shared and individual) will remain.
F [Wipeall] - Will wipe the whole memory, setting the console back to
factory default state. The settings of the B, C and D options are
ignored.
G [OK] - Will wipe the memory as set by options B, C and D.
12.2.2 Disk functions
The Pearl allows shows to be stored on and retrieved from USB drives.
It also has an internal USB drive which can be used to save shows, as
well as being used to store personalities. The Pearl 2008 also has a
floppy disk drive allowing shows to be transferred between Pearl 2008
consoles and other consoles in the Pearl range. The Pearl Tiger does not
have a floppy disk drive.
Press the Disk button to display the disk menu. The options are:
A [Load show from disk] – Loads a show from a storage device. The
Pearl displays a list of connected drives including the internal USB
drive. Select the drive on which your show is saved.
For USB drives, the LCD will display a list of stored show names
which can be selected by pressing the softkey next to it. The LCD
will now display a list of all available saved versions of your show
Vista de pagina 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 205 206

Comentarios a estos manuales

Sin comentarios