Chauvet Scorpion Dual Manual de usuario descargar pdf (Pagina 16)

Page 16 of 64 Scorpion™ Dual User Manual Rev. 1

4. OPERATION

This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the

life of your laser. Always disconnect the Scorpion™ Dual from power when not in use.

Control Panel

Operation

To access the control panel functions, use the four buttons located underneath the

display. When the product is on, the LED monitor on the rear panel will show t

he current

operating mode (standalone or DMX). The product will retain the last saved settings when

powered off.

Button Function

<MENU>

Selects an operation mode or backs out of the current menu option

<UP>

Scrolls up the list of options or selects a higher value

<DOWN>

Scrolls down the list of options or selects a lower value

<ENT>

Activates a menu option or a selected value

Menu Map

Mode

Programming Steps

Description

DMX Mode

001–503

Selects DMX starting address

Slave Mode

SLA

Slave mode

Remote Control

rEN

Wireless remote control

Test Mode

tSt

Test pattern

Sound-Active/Auto

Modes

Sou

Sound-Active mode

Aut

Auto mode

Sensitivity

S 0–S 9

Sound sensitivity control

Configuration

(DMX)

Set the product in DMX mode to control with a DMX controller.

1. Connect the product to a suitable power outlet.

2. Turn the product on.

3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input

socket on the product.

Starting Address

When selecting a DMX starting address, always co

nsider the number of DMX channels

the selected DMX mode uses. If you choose a starting address that is too high, you could

restrict the access to some of the product’s channels.

The Scorpion™ Dual uses up to 10 DMX channels in

DMX mode, which defines the

highest configurable address to 503.

If you are not familiar with the DMX protocol, download the DMX Primer from

www.chauvetlighting.com.

To select the starting address, do the following:

1. Press <MENU> repeatedly until 001–506 blinks on the display.

2. Use <UP> or <DOWN> to select the starting address.

3. Press <ENTER>.

Test Mode

Activate the laser test pattern as follows.

1. Press <MENU> repeatedly until tSt blinks on the display.

2. Press <ENTER>.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 63 64

Comentarios a estos manuales

Sin comentarios

Chauvet Scorpion Dual Manual de usuario Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Controladores de dj Chauvet Scorpion Dual