Chauvet Scorpion Dual Manual de usuario descargar pdf (Pagina 14)

Page 14 of 64 Scorpion™ Dual User Manual Rev. 1

Mounting

Before mounting the product

, read and follow the safety recommendations indicated in

the Safety Notes.

Orientation

The Scorpion™ Dual must be mounted in a position

that includes planning for safe laser

usage. In addition, make sure adequate ventilation is provided around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access

to the product for maintenance and programming.

• Make sure that the structure or surface onto which you are mounting the product can

support the product’s weight (see the Technical Specifications

• When mounting the product overhead, always use a safety cable. Mount the product

securely to a rigging point, such as an elevated platform or a truss.

• When rigging the

product onto a truss, you should use a mounting clamp of

appropriate weight capacity. The bracketed has a 13-mm hole, which is

appropriate

for this purpose.

• The bracket adjustment

knobs allow for directional adjustment when aiming the

product to the desired angle. Only loosen or tighten the bracket knobs manually.

Using tools could damage the knobs.

Mounting Clamp

(such as CLP-15 or CLP-15N

from CHAUVET®)

Safety Cable

(such as CH-05 from

CHAUVET®)

Mounting Bracket

Bracket

Adjustment

Knob x2

Surface

Supports

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Sin comentarios

Chauvet Scorpion Dual Manual de usuario Pagina 14