Chauvet MINWASH DMX-512 Manual de usuario descargar pdf (Pagina 20)

5. Appendix 20 6/14/2010 4:13 PM

Setting the Starting Address

This DMX mode enables the use of a universal DMX controller device. Each fixture requires a start address

from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel

indicated by the start address. For example, a fixture that uses six DMX channels and was addressed to start

on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, and 105. Choose start

addresses so that the channels used do not overlap, and note the start address selected for future reference.

If this is your first time addressing a fixture using the DMX control protocol, we suggest jumping to the

“Appendix” section and reading the heading “DMX Primer”. It contains very useful information that will help you

understand its use.

General Troubleshooting

YMPTOM

OSSIBLE

AUSE

(

) P

OSSIBLE

CTION

(

)

Breaker/Fuse

keeps blowing

• Excessive circuit load • Check total load placed on the electrical circuit.

• Short circuit along the power

wires

• Check for a short in the electrical wiring (internal and/or

external)

Device does not

power up

• No power • Check for power on power outlet

• Loose power cord • Check power cord

Fixture is not

responding to

DMX

• Wrong DMX addressing • Check Control Panel and unit addressing

• Damaged DMX cables • Check DMX cables

• Wrong polarity settings on the

controller

• Check polarity switch settings on the controller

• Loose DMX cables • Check cable connections

• Faulty DMX interface • Replace DMX input

• Faulty Main PCB • Replace Main PCB

Loss of signal

• Non DMX cables • Use only DMX compatible cables

• Bouncing signals • Install terminator as suggested

• Long cable / Low level signal • Install amplifier right after fixture with strong signal

• Too many fixtures • Install an optically coupled DMX splitter after unit #32

• Interference from AC wires • Keep DMX cables separated from power cables or

black lights

If you still have a problem after trying the above solutions, please contact CHAUVET Technical

Support.

World Wide

General Information CHAUVET®

3000 North 29

Court

Hollywood, FL 33020

voice: 954.929.1115

fax: 954.929.5560

toll free: 800.762.1084

Technical Support CHAUVET®

3000 North 29

Court

Hollywood, FL 33020

voice: 954.929.1115 (Press 4)

fax: 954.929.5560 (Attention: Service)

World Wide Web www.chauvetlighting.com

1 2 ... 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios

Chauvet MINWASH DMX-512 Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Controladores de dj Chauvet MINWASH DMX-512