Chauvet Scorpion Script Manual de usuario descargar pdf (Pagina 13)

Scorpion™ Script User Manual Rev. 3 Page 13 of 64

3. SETUP

AC Power

This product includes an external power supply which is auto-ranging and runs on

100 to 240 VAC, 50/60 Hz power. Only use the included power supply! To obtain a

replacement power supply, contact Chauvet.To determine the power requirements for a

particular product, see the label affixed to the product or refer to the product’s

specifications chart. A product’s listed current rating indicates its average current draw

under normal conditions.

Always connect the product to a protected circuit (circuit breaker or fuse). Never

connect the product

to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel is used only as a 0 to 100% switch.

This product has an internal battery to retain the date, time and other program

settings even while the product is not plugged into AC power. This battery

charges when the

product is in use, and will lose charge after 2 months of

nonuse.

Mounting

Before mounting the

product, read and follow the safety recommendations indicated in

the Safety Notes. See Proper Usage.

Orientation

The Scorpion™ Script

must be mounted in a position that includes planning for safe

laser usage. In addition, make sure adequate ventilation is provided around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy

access to the product for maintenance and programming.

• Make sure that the structure or surface onto which you are mounting the product

can support the product’s weight (see the Technical Specifications

• When mounting the product overhead

, always use a safety cable. Mount the

product securely to a rigging point, such as an elevated platform or a truss.

• When rigging the

product onto a truss, you should use a mounting clamp of

appropriate weight capacity. The double-bracketed yoke has 13-mm holes

, which

are appropriate for this purpose.

•

The bracket adjustment knobs allow for directional adjustment when aiming the

product

to the desired angle. Only loosen or tighten the bracket knobs manually.

Using tools could damage the knobs.

Bracket

Adjustment Knob

Mounting Bracket used

as a Floor Support

Mounting Clamp

(such as CLP-15 from

Chauvet)

Safety Cable

(such as CH-05

from Chauvet)

Mounting Bracket

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Comentarios a estos manuales

Sin comentarios

Chauvet Scorpion Script Manual de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Reflectores Chauvet Scorpion Script