Chauvet Intimidator COLOR LED Manual de usuario descargar pdf (Pagina 15)

Intimidator™ Beam LED 350 User Manual Rev. 3 Page 15 of 19

Configuration

(Standalone)

Set the product in one of the standalone modes to control without a DMX controller.

1. Connect the product to a suitable power outlet.

2. Turn the product on.

Never connect a product that is operating in any standalone mode (either

Automatic, or Sound-Active)

to a DMX string connected to a DMX controller.

Product

s in standalone mode may transmit DMX signals that could interfere with

the DMX signals from the controller.

Sound-Active

Mode

To enable the Sound-Active mode, do the following:

1. Press <MODE/ESC> repeatedly until one of the following shows on the display:

nASL, nAFA, nStS, SLAv

2. Press <UP> or <DOWN> to select NStS.

3. Press <ENTER> and SrUn shows on the display.

4. Turn the music on.

The product will only respond to low frequencies of music (bass and drums).

Automatic Mode

To enable the Automatic mode, do the following:

1. Press <MODE/ESC> repeatedly until one of the following shows on the display:

nASL, nAFA, nStS, SLAv

2. Press <UP> or <DOWN> to select nASL (for a slow program) or nAFA (for a fast

program).

3. Press <ENTER> and SLoU displays while in slow program or FASt displays while

in fast program.

Manual Pan/Tilt

Operation

To select either normal panning or inverted panning, do the following:

1. Press <MODE/ESC> repeatedly until PAn or rPAn shows on the display.

2. Press <UP> or <DOWN> to select PAn (normal pan operation) or rPAn (inverse

pan operation).

3. Press <ENTER>.

To select either normal tilting or inverted tilting, do the following:

1. Press <MODE/ESC> repeatedly until tit shows on the display.

2. Press <UP> or <DOWN> to select tit (normal tilt operation) or rtit (inverse tilt

operation).

3. Press <ENTER>.

Pan/Tilt Angle

Range

To select which pan angle to use:

1. Press <MODE/ESC> repeatedly until PA54, PA36, or PA18 shows on the display.

2. Press <UP> or <DOWN> to select PA54 (540°), PA36 (360°), or PA18 (180°).

3. Press <ENTER>.

To select which tilt angle to use:

1. Press <MODE/ESC> repeatedly until ti27, ti18, or ti 9 shows on the display.

2. Press <UP> or <DOWN> to select ti27 (270°), ti18 (180°), or ti 9 (90°).

3. Press <ENTER>.

1 2 ... 10 11 12 13 14 15 16 17 18 19

Comentarios a estos manuales

Sin comentarios

Chauvet Intimidator COLOR LED Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Controladores de dj Chauvet Intimidator COLOR LED